Aerosol pesticides in aluminum cans are a common element of many pest management systems. These ready-to-use treatments are popular due to their ease of use and capacity to be sprayed and penetrate into the voids and crevices where pests reside. To make sure that applications are not only safe but also effective, a technician will examine the safety issues of these products in addition to their ease of use.
In order to release the pesticide from the can, canned aerosols employ propellants. This propellant has the potential to catch fire. View site to learn more about how to use aerosol effectively to remove pests.
How to use aerosol canned sprays effectively to remove pests
The lower explosion limit (LEL) and upper explosion limit (UEL) provided by the flammability range specify the atmospheric concentration at which the product may pose a fire or explosive hazard. The product will not ignite if its concentration is too rich or higher than the UEL. The product will not ignite if the airborne level of the product is less than the LEL. It is true to say that the wider the range between the LEL and UEL, the higher the chance of an ignition, even though it may be hard to determine precisely how much is in the atmosphere during application.
The Physical and Chemical Risks section of the product label will also include guidelines on flammability. To better explain what an applicator can do to improve safety, action statements are provided.
Before you begin your application, you should do a thorough check and look for the precautions listed on the label and SDS of the specific item you are thinking about applying.
Some advice can help pest management experts use canned aerosol products safely:
-
Read the label
For information on what to do to avoid hazardous applications, read the label and SDS.
-
Examine the place of application
Examine the area thoroughly to look for any risks that might harm your application.
-
Do not apply too much product
Avoid applying too much product. Applying more product than suggested on the label may result in a buildup of explosive fumes.
-
Proper storage
To avoid the can being ruptured, store the product in an area with adequate airflow and keep it tightly fastened.
-
Remove dangers
Turn off all sources of ignition, including pilot lights. To avoid a flammable condition, open flames should be put out. Keep in mind that a spark can also be generated through static electricity alone. (The Environmental Protection Agency advises that foggers should be positioned at least six feet away from sources of ignition.)
-
Check the temperature limit
Verify surface area temperatures to ensure they fall below the SDS Section 9 flashpoint temperature limit. Remember that when the temperature of the treatment area rises, vapor drift can become an issue. A possible fire could result from product drifting from one location to another, where a pilot light might be burning, etc.
-
Do not let pets and kids
Keep kids and pets away from the treated area until the pesticide has dried. Make sure the treated area is sufficiently ventilated by opening windows and doors and following all label directions before letting them inside the area. Before spraying, clear the area of kids’ and pets’ toys and pet food dishes.
-
Clear spills
When wiping up an area that has been sprayed or spilled, use a paper towel and warm, soapy water.
Conclusion
In the US, aerosol-driven pesticides are responsible for 500 fires and explosions every year. The pest management sector has to act responsibly and prioritize safety, just like with any other chemical application.
Choosing your pesticide product and application technique involves careful review of your product label and SDS, as well as a review before application to find environmental elements that can create a flammable condition.
